HPE SSD 1.6TB, 2.5 inch, SAS, 24G, Write Intensive BC, PM6
Specifications
General |
|
|---|---|
| Device Type | Solid state drive – hot-swap |
| Capacity | 1.6 TB |
| NAND Flash Memory Type | Triple-level cell (TLC) |
| Form Factor | 2.5 SFF |
| Interface | SAS 22.5Gb/s |
| Features | Digitally Signed Firmware |
| Height | 15 mm |
| Bundled with | HPE Basic Carrier |
Performance |
|
| Drive Writes Per Day (DWPD) | 10 |
| SSD Endurance | 28534 TB |
| Drive Transfer Rate | 2.4 GBps (external) |
| Internal Data Rate | 1080 MBps (read) / 1035 MBps (write) |
| 4KB Random Read | 173000 IOPS |
| 4KB Random Write | 130000 IOPS |
Expansion amp; Connectivity |
|
| Interfaces | 1 x SAS 22.5Gb/s |
| Compatible Bay | 2.5 SFF |
Power |
|
| Power Consumption | 2.98 Watt (idle) 5.77 Watt (random read) 5.77 Watt (random write) 7.15 Watt (sequential read) 9.91 Watt (sequential write) 5.77 Watt (random read/write) 9.91 Watt (maximum) |
Manufacturer Warranty |
|
| Service amp; Support | Limited warranty – parts – 3 years |
Compatibility Information |
|
| Designed For | HPE ProLiant DL20 Gen10 Plus (2.5) DL20 Gen10 Plus Base (2.5) DL20 Gen10 Plus Entry (2.5) DL20 Gen10 Plus High Performance (2.5) DL20 Gen10 Plus Performance (2.5) DL325 Gen10 Plus V2 (2.5) DL325 Gen10 Plus V2 Base (2.5) DL325 Gen10 Plus V2 for Weka Base Tracking (2.5) DL325 Gen10 Plus V2 Performance (2.5) DL345 Gen10 Plus (2.5) DL345 Gen10 Plus Base (2.5) DL345 Gen10 Plus Entry (2.5) DL360 Gen10 Plus (2.5) DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5) DL360 Gen10 Plus for Weka Base Tracking (2.5) DL360 Gen10 Plus Network Choice (2.5) DL365 Gen10 Plus (2.5) DL380 Gen10 Plus (2.5) DL380 Gen10 Plus Network Choice (2.5) DL385 Gen10 Plus V2 (2.5) DL385 Gen10 Plus V2 Base (2.5) DL385 Gen10 Plus V2 Entry (2.5) HPE SimpliVity 325 Gen10 Plus V2 Node (2.5) |
