AP-225 WIRELESS ACCES POINT (N2)
Specifications
General |
|
|---|---|
| Status | N2 |
| Device Type | Radio access point |
| Width | 20.3 cm |
| Depth | 20.3 cm |
| Height | 6.5 cm |
| Weight | 750 g |
Networking |
|
| Form Factor | External |
| Connectivity Technology | Wireless |
| Data Transfer Rate | 1.3 Gbps |
| Line Coding Format | CCK 64 QAM BPSK QPSK 16 QAM OFDM |
| Data Link Protocol | IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n IEEE 802.11ac |
| Spread Spectrum Method | OFDM DSSS |
| Frequency Band | 2.4 GHz 5 GHz |
| Features | Auto-sensing per device power over Ethernet (PoE) auto-uplink (auto MDI/MDI-X) PoE+ Maximum Ratio Combining (MRC) dual-band 802.11n 3T3R MIMO technology Low Density Parity Check (LDPC) Transmit Beam-forming (TxBF) ready |
| Compliant Standards | IEEE 802.11b IEEE 802.11a IEEE 802.3af IEEE 802.11g Wi-Fi CERTIFIED IEEE 802.11n IEEE 802.3at IEEE 802.3az IEEE 802.11ac |
Aerial |
|
| Antenna | Internal |
| Antenna Qty | 6 |
Expansion / Connectivity |
|
| Interfaces | 2 x 1000Base-T – RJ-45 1 x management – RJ-45 1 x USB 2.0 – Type A |
Miscellaneous |
|
| Compliant Standards | EN 60950 IEC 60950 UL 60950 CB FCC Ramp;TTE EN 60601-1-2 cTUVus LVD EN 300 328 EN 301 893 |
Power |
|
| Power Over Ethernet (PoE) Supported | PoE |
| Power Consumption Operational | 15 Watt |
Environmental Parameters |
|
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 5 – 95% (non-condensing) |
