Catalyst 3560X 24 Port PoE IP Base 2x fan and 1x Psu Incl (R4)
Specifications
| Label | Catalyst 3560X 24 Port PoE IP Base 2x fan and 1x Psu Incl (R4) |
|---|---|
| Status | R4 |
| Product Description | Cisco Catalyst 3560X-24P-S – switch – 24 ports – Managed – rack-mountable |
| Device Type | Switch – 24 ports – Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 24 x 10/100/1000 (PoE) |
| Power Over Ethernet (PoE) | PoE |
| Performance | Switching fabric bandwidth: 160 Gbps |
| Capacity | Virtual interfaces (VLANs): 1005 |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | RIP-1 RIP-2 HSRP static IP routing RIPng |
| Remote Management Protocol | SNMP 1 SNMP 2 RMON 1 RMON 2 RMON 3 RMON 9 Telnet SNMP 3 SNMP 2c TFTP SSH CLI |
| Features | Hot swap module replacement Layer 2 switching dynamic IP address assignment DHCP support power over Ethernet (PoE) auto-negotiation ARP support trunking VLAN support auto-uplink (auto MDI/MDI-X) IGMP snooping Syslog support traffic shaping Broadcast Storm Control High Availability Multicast Storm Control Unicast Storm Control Rapid Spanning Tree Protocol (RSTP) support DHCP snooping Dynamic Trunking Protocol (DTP) support Port Aggregation Protocol (PAgP) support Trivial File Transfer Protocol (TFTP) support Access Control List (ACL) support Quality of Service (QoS) Jumbo Frames support MLD snooping Dynamic ARP Inspection (DAI) PoE+ Per-VLAN Spanning Tree Plus (PVST+) Uni-Directional Link Detection (UDLD) Shaped Round Robin (SRR) Link Aggregation Control Protocol (LACP) Remote Switch Port Analyzer (RSPAN) |
| Compliant Standards | IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.1D IEEE 802.1Q IEEE 802.3ab IEEE 802.1p IEEE 802.3af IEEE 802.3x IEEE 802.3ad (LACP) IEEE 802.1w IEEE 802.1x IEEE 802.1s IEEE 802.1ae IEEE 802.3at |
| Power | AC 120/230 V (50/60 Hz) |
| Power Redundancy | Optional |
| Dimensions (WxDxH) | 44.5 cm x 46 cm x 4.5 cm |
| Weight | 7.1 kg |
General |
|
|---|---|
| Status | R4 |
| Device Type | Switch – 24 ports – Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 24 x 10/100/1000 (PoE) |
| Power Over Ethernet (PoE) | PoE |
| Performance | Switching fabric bandwidth: 160 Gbps |
| Capacity | Virtual interfaces (VLANs): 1005 |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | RIP-1 RIP-2 HSRP static IP routing RIPng |
| Remote Management Protocol | SNMP 1 SNMP 2 RMON 1 RMON 2 RMON 3 RMON 9 Telnet SNMP 3 SNMP 2c TFTP SSH CLI |
| Authentication Method | Kerberos Secure Shell (SSH) RADIUS TACACS+ |
| Features | Hot swap module replacement Layer 2 switching dynamic IP address assignment DHCP support power over Ethernet (PoE) auto-negotiation ARP support trunking VLAN support auto-uplink (auto MDI/MDI-X) IGMP snooping Syslog support traffic shaping Broadcast Storm Control High Availability Multicast Storm Control Unicast Storm Control Rapid Spanning Tree Protocol (RSTP) support DHCP snooping Dynamic Trunking Protocol (DTP) support Port Aggregation Protocol (PAgP) support Trivial File Transfer Protocol (TFTP) support Access Control List (ACL) support Quality of Service (QoS) Jumbo Frames support MLD snooping Dynamic ARP Inspection (DAI) PoE+ Per-VLAN Spanning Tree Plus (PVST+) Uni-Directional Link Detection (UDLD) Shaped Round Robin (SRR) Link Aggregation Control Protocol (LACP) Remote Switch Port Analyzer (RSPAN) |
| Compliant Standards | IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.1D IEEE 802.1Q IEEE 802.3ab IEEE 802.1p IEEE 802.3af IEEE 802.3x IEEE 802.3ad (LACP) IEEE 802.1w IEEE 802.1x IEEE 802.1s IEEE 802.1ae IEEE 802.3at |
| Flash Memory | 128 MB Flash |
| Status Indicators | Port status port transmission speed port duplex mode power system link/activity |
Expansion / Connectivity |
|
| Interfaces | 24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE 1 x USB Type A 1 x console – mini-USB Type B management 1 x RS-232 – RJ-45 management 1 x 10Base-T/100Base-TX – RJ-45 management |
| Expansion Slots | 1 (total) / 1 (free) x Expansion Slot |
Power |
|
| Power Device | Internal power supply |
| Installed Qty | 1 |
| Max Supported Qty | 2 |
| Power Redundancy | Optional |
| Power Redundancy Scheme | 1+1 (with optional power supply) |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Features | Redundant Power System (RPS) connector |
Miscellaneous |
|
| Rack Mounting Kit | Optional |
| MTBF | 181 370 hours |
| Compliant Standards | TUV GS CISPR 22 Class A GOST cUL NOM VCCI Class A ITE EN55022 Class A CB AS/NZS 60950-1 AS/NZ 3548 Class A CCC RoHS UL 60950-1 IEC 60950-1 EN 60950-1 KCC FCC Part 15 A CSA C22.2 No. 60950-1 |
Software / System Requirements |
|
| Software Included | Cisco IOS IP Base |
Dimensions amp; Weight |
|
| Width | 44.5 cm |
| Depth | 46 cm |
| Height | 4.5 cm |
| Weight | 7.1 kg |
Environmental Parameters |
|
| Min Operating Temperature | -5 °C |
| Humidity Range Operating | 5 – 95% (non-condensing) |
| Min Storage Temperature | -40 °C |
| Max Storage Temperature | 70 °C |
R4 – Refurb Refurbished products have sleight cosmetic marks, preventing them from entering our Approved Selection line. This doesn’t influence functionality in any way. Refurbished is the perfect choice for large-scale standardization where previous models are required, and functionality is more important than cosmetics. Purchasing circular products helps save precious resourced by fully utilizing a product’s lifecycle before disposal.
Warranty
Refurbished products have a standard 12 months warranty.
Packaging
Refurbished is packed separately in brown box, or in bulk.
Contents
R4 Refurbished products come with selected R4 accessories (eg. power supply, battery, etc.).
Please note that a R4 – iPhone or iPad does not come with a power adapter and Refurbished printers are delivered without toners. Keyboard and mouse are sold separately for desktops, thin clients and workstations.
Condition
Refurbished may have visible cosmetic (user) marks. This does not influence the functionality in any way.
