Catalyst 2960-X 24 GigE PoE 370W 2 x 10G (R4)
Specifications
Label | Catalyst 2960-X 24 GigE PoE 370W 2 x 10G (R4) |
---|---|
Status | R4 |
Product Description | Cisco Catalyst 2960X-24PD-L – switch – 24 ports – Managed – rack-mountable |
Device Type | Switch – 24 ports – Managed – stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 24 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+ |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 370 W |
Performance | Switching capacity: 216 Gbps Forwarding performance (64-byte packet size): 95.2 Mpps |
Capacity | Virtual interfaces (VLANs): 1023 |
Jumbo Frame Support | 9216 bytes |
Remote Management Protocol | SNMP 1 SNMP 2 RMON 1 RMON 2 RMON 3 RMON 9 Telnet SNMP 3 SNMP 2c HTTP SSH CLI |
Features | Layer 2 switching DHCP support power over Ethernet (PoE) auto-negotiation ARP support trunking VLAN support auto-uplink (auto MDI/MDI-X) IPv6 support Rapid Spanning Tree Protocol (RSTP) support Multiple Spanning Tree Protocol (MSTP) support Dynamic Trunking Protocol (DTP) support Port Aggregation Protocol (PAgP) support Trivial File Transfer Protocol (TFTP) support Access Control List (ACL) support RADIUS support Jumbo Frames support MLD snooping Dynamic ARP Inspection (DAI) PoE+ Cisco EnergyWise technology Unicast Reverse Path Forwarding (URPF) Uni-Directional Link Detection (UDLD) Rapid Per-VLAN Spanning Tree Plus (PVRST+) IPv4 support Shaped Round Robin (SRR) Link Aggregation Control Protocol (LACP) Remote Switch Port Analyzer (RSPAN) NetFlow Hot Standby Router Protocol (HSRP) support Energy Efficient Ethernet |
Compliant Standards | IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.1D IEEE 802.1Q IEEE 802.3ab IEEE 802.1p IEEE 802.3af IEEE 802.3x IEEE 802.3ad (LACP) IEEE 802.1w IEEE 802.1x IEEE 802.3ae IEEE 802.1ae IEEE 802.3at IEEE 802.3az IEEE 802.1AX |
Power | AC 120/230 V (50/60 Hz) |
Power Redundancy | Optional |
Dimensions (WxDxH) | 44.5 cm x 36.8 cm x 4.5 cm |
Weight | 5.7 kg |
General |
|
---|---|
Status | R4 |
Device Type | Switch – 24 ports – Managed – stackable |
Enclosure Type | Desktop rack-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 24 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+ |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 370 W |
Performance | Switching capacity: 216 Gbps Forwarding performance (64-byte packet size): 95.2 Mpps |
Capacity | Virtual interfaces (VLANs): 1023 |
Jumbo Frame Support | 9216 bytes |
Max Units In A Stack | 8 |
Remote Management Protocol | SNMP 1 SNMP 2 RMON 1 RMON 2 RMON 3 RMON 9 Telnet SNMP 3 SNMP 2c HTTP SSH CLI |
Authentication Method | Kerberos Secure Shell (SSH) RADIUS TACACS+ |
Features | Layer 2 switching DHCP support power over Ethernet (PoE) auto-negotiation ARP support trunking VLAN support auto-uplink (auto MDI/MDI-X) IPv6 support Rapid Spanning Tree Protocol (RSTP) support Multiple Spanning Tree Protocol (MSTP) support Dynamic Trunking Protocol (DTP) support Port Aggregation Protocol (PAgP) support Trivial File Transfer Protocol (TFTP) support Access Control List (ACL) support RADIUS support Jumbo Frames support MLD snooping Dynamic ARP Inspection (DAI) PoE+ Cisco EnergyWise technology Unicast Reverse Path Forwarding (URPF) Uni-Directional Link Detection (UDLD) Rapid Per-VLAN Spanning Tree Plus (PVRST+) IPv4 support Shaped Round Robin (SRR) Link Aggregation Control Protocol (LACP) Remote Switch Port Analyzer (RSPAN) NetFlow Hot Standby Router Protocol (HSRP) support Energy Efficient Ethernet |
Compliant Standards | IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.1D IEEE 802.1Q IEEE 802.3ab IEEE 802.1p IEEE 802.3af IEEE 802.3x IEEE 802.3ad (LACP) IEEE 802.1w IEEE 802.1x IEEE 802.3ae IEEE 802.1ae IEEE 802.3at IEEE 802.3az IEEE 802.1AX |
Processor | 1 x ARM: 600 MHz |
Flash Memory | 128 MB |
Status Indicators | Port status port transmission speed port duplex mode system link/activity |
Expansion / Connectivity |
|
Interfaces | 24 x 1000Base-T 10Base-T/100Base-TX/1000Base-T – RJ-45 – RJ-45 PoE+ – 30 W 1 x console console – RJ-45 – RJ-45 management 1 x mini-USB console – mini-USB Type B – Type B management 1 x USB Type A 1 x 1000Base-TX 10Base-T/100Base-TX – RJ-45 – RJ-45 management 2 x SFP+ – SFP+ |
Expansion Slots | 1 (total) / 1 (free) x Stacking Module |
Power |
|
Power Device | Internal power supply |
Power Redundancy | Optional |
Voltage Required | AC 120/230 V (50/60 Hz) |
Features | Redundant Power System (RPS) connector |
Miscellaneous |
|
MTBF | 325 780 hours |
Compliant Standards | CISPR 22 Class A CISPR 24 EN 61000-3-2 EN 61000-3-3 EN55024 EN55022 Class A AS/NZS 60950-1 ICES-003 Class A RoHS FCC CFR47 Part 15 UL 60950-1 Second Edition CSA C22.2 No. 60950-1 Second Edition EN 60950-1 Second Edition IEC 60950-1 Second Edition VCCI Class A KN22 KN24 CNS 13438(95) Class A EN 300 386 |
Software / System Requirements |
|
Software Included | Cisco IOS LAN Base |
Dimensions amp; Weight |
|
Width | 44.5 cm |
Depth | 36.8 cm |
Height | 4.5 cm |
Weight | 5.7 kg |
Environmental Parameters |
|
Min Operating Temperature | -5 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 10 – 95% (non-condensing) |
Min Storage Temperature | -25 °C |
Max Storage Temperature | 70 °C |
Humidity Range Storage | 10 – 95% (non-condensing) |
R4 – Refurb Refurbished products have sleight cosmetic marks, preventing them from entering our Approved Selection line. This doesn’t influence functionality in any way. Refurbished is the perfect choice for large-scale standardization where previous models are required, and functionality is more important than cosmetics. Purchasing circular products helps save precious resourced by fully utilizing a product’s lifecycle before disposal.
Warranty
Refurbished products have a standard 12 months warranty.
Packaging
Refurbished is packed separately in brown box, or in bulk.
Contents
R4 Refurbished products come with selected R4 accessories (eg. power supply, battery, etc.).
Please note that a R4 – iPhone or iPad does not come with a power adapter and Refurbished printers are delivered without toners. Keyboard and mouse are sold separately for desktops, thin clients and workstations.
Condition
Refurbished may have visible cosmetic (user) marks. This does not influence the functionality in any way.